$152.00 - $157.00
Share

Magna'Tron Neck - DeArmond Mount

Add to Cart

Options

$152.00 - $157.00

Info

,Width: ,Height: ,Depth:

Info

Specifications

Position, Resistance, Inductance, Pole Spacing E to E, Pole to Pole Spacing,

Specifications

Position:
Neck
Resistance:
4.8k
Inductance:
1.24H
Pole Spacing E to E:
1.90"
Pole to Pole Spacing:
.380"

Description

Magna'Tron™ Neck Pickup - DeArmond Mount

The Magna'Tron blends single-coil twang with unique Filter'Tron & DeArmond influence. Although it can sound just like a single-coil, it is built with two coils (humbucking). The dual-coils provide a hint of compression on the high-end and no 60-cycle hum. One part of this design that makes the Magna'Tron so special is it's staggered cylinder Fender-style magnets.

Tone/Characteristics

Bright and chirpy with quick attack and exceptional pop and clarity. The Magna'Tron delivers a unique mix of single-coil spank meets Filter'Tron style twang with no hum! Slightly brighter and tighter on the bass than the TV Classic.

 

Output/Power

DC Resistance is not entirely an indicator of true pickup output, although it can be helpful.

Bridge: DCR - 8.0k / Inductance - 2.92H

Neck: DCR - 4.8k / Inductance - 1.24H

Installation:

The DeArmond Mount is a direct drop-in replacement for standard sized Dynasonic/DeArmond 2000 style pickups. This pickup comes with two pieces of foam shims for height adjustment. DeArmond Mounting Screws are sold separately if necessary. 

Wiring Notes

This pickup is shipped with 4-conductor wire but is ready for standard 2-conductor connection. The extra red and green wires come soldered together and taped off - to split coils, send these to ground. Please do not sever the green and red wires - your pickup will not work due to the circuit being broken.

Splitting coils is generally not recommended with the Magna'Tron because of its natural tight and bright sound, however some may enjoy it. Additionally, the 4-Conductor wire is convenient for custom switching i.e. pickups combined in series or parallel.

Helpful Notes

Dynasonic/DeArmond Replacement: The DeArmond Mount is a direct drop in replacement for Vintage DeArmonds, Dynasonics, and most other DeArmond 2000 style pickups.

Filter'Tron Replacement: Replacing Filter'Tron-style pickups with DeArmond Mount pickups is not optimal.

Mounting Screws: DeArmond Mounting screws are sold seperately because most people use the ones already on their guitar. If you need new or extra screws, you can find them here or in our hardware section.

 

 

 

TV Jones DeArmond Mount Dimensions

 



>

Customers Also Viewed