The Magna'Tron blends single-coil twang with unique Filter'Tron & DeArmond influence. Although it can sound just like a single-coil, it is built with two coils (humbucking). The dual-coils provide a hint of compression on the high-end and no 60-cycle hum. One part of the recipe that makes the Magna'Tron so special is its staggered cylinder Fender-style magnets.
Bright and chirpy with quick attack and exceptional pop and clarity. The Magna'Tron delivers a unique mix of single-coil spank meets Filter'Tron style twang with no hum! Slightly brighter and tighter on the bass than the TV Classic.
DC Resistance is not entirely an indicator of true pickup output, although it can be helpful.
Bridge: DCR - 8.0k / Inductance - 2.92H
Neck: DCR - 4.8k / Inductance - 1.24H
The DeArmond Mount is a direct drop-in replacement for standard sized Dynasonic/DeArmond 2000 style pickups. This pickup comes with two pieces of foam shims for height adjustment. DeArmond Mounting Screws are sold separately if necessary.
This pickup is shipped with 4-conductor wire but is ready for standard 2-conductor connection. The extra red and green wires come soldered together and taped off - to split coils, send these to ground.
Splitting coils is generally not recommended with the Magna'Tron because of its natural tight and bright sound; however, some may enjoy it. Additionally, the 4-Conductor wire is convenient for custom switching, i.e. pickups combined in series or parallel.
Dynasonic/DeArmond Replacement: The DeArmond Mount is a direct drop in replacement for Vintage DeArmonds, Dynasonics, and most other DeArmond 2000 style pickups.
Filter'Tron Replacement: Replacing Filter'Tron-style pickups with DeArmond Mount pickups is not optimal.
Mounting Screws: DeArmond Mounting screws are sold seperately because most people use the ones already on their guitar. If you need new or extra screws, you can find Dearmond Mounting Screws in our hardware section.