Position,
Resistance,
Inductance,
Recommended Pot Value,
Specifications
Position:
Neck
Resistance:
4.0k
Inductance:
1.81H
Recommended Pot Value:
500k
Description
Super'Tron™ Neck Pickup - DeArmond Mount
The TV Jones Super'Tron is a replica of the original early 1960's prototype design. It is basically a TV Classic with steel blades instead of pole screws and the resulting tone retains classic Filter'tron clarity, but with a bold and full broadband punch. Bridge blades are curved and neck blades are flat for optimal string to string energy.
Tone/Characteristics
The steel blades used in the Super'Tron provide a larger magnetized surface area producing greater inductance. While the DC Resistance is the same as the TV Classic, you will notice a little more output and body with a slightly more accentuated lower-mid range. Warmer and less aggressive than the mid 1960's Gretsch Super'Trons (which had a bunch of thin laminated steel blades instead of one piece of steel). Great choice for finger picking, jazz, punk, blues... it has been said that this design was loved by Chet Atkins (according to Paul Yandell).
Output/Power
DC Resistance is not entirely an indicator of true pickup output, although it can be helpful.
Bridge: DCR - 4.8k / Inductance - 2.64H
Neck: DCR - 4.0k / Inductance - 1.81H
Installation:
The DeArmond Mount is a direct drop-in replacement for guitars with standard sized Dynasonic/DeArmond 2000 style pickups. This pickup comes with two pieces of foam shims for height adjustment. DeArmond Mounting Screws are sold separately if necessary.
Wiring Notes
The Super'Tron is shipped with 4-conductor wire but is ready for standard 2-conductor connection. The extra red and green wires come soldered together and taped off - to split coils, send these to ground.
Splitting coils is generally not recommended for the Super'Tron due to low coil output but some say it works well due to higher coil inductance (because of the steel blades). 4-Conductor wire is also convenient for custom switching i.e. pickups combined in series or parallel.
Helpful Notes
Dynasonic/DeArmond Replacement: The DeArmond Mount is a direct drop in replacement for guitars with Vintage DeArmonds, Dynasonics, and most other DeArmond 2000 style pickups.
Gretsch G6128TDS 2020 and newer: The pickups in this guitar are not the same size (height) as Vintage DeArmonds or older DynaSonics. TV Jones T-Armond pickups will not fit this guitar.
Filter'Tron Replacement: Replacing Filter'Tron-style pickups with DeArmond Mount pickups is not optimal.
Mounting Screws: DeArmond Mounting screws are sold seperately because most people use the ones already on their guitar. If you need new or extra screws, you can find Dearmond Mount screws in our hardware section.
